PE3-IG2 dual plug ignition for 993 Porsche - crank trigger

PE3-IG2 dual plug ignition for 911 Porsche, 1995-98 (model 993) 3.6 liter engine

Includes:

• Performance Electronics PE3-IG2 ignition & main harness
  • A DIY wiring harness is included, which is terminated on the ECU end into the appropriate connector, but free lengths of unterminated wire on the other end. The installer must route, terminate, and cover the harness to complete the installation.
• 2x Coil pack - Bosch 3x2 type
• Dual plug ignitor kit
• Hall Crank crank sensor
• Adapter kit : 2 groove pulley (compatible with stock v-belt and dual pulleys for cooling fan and alternator), trigger wheel, sensor mount, distributor hole plug
• Instructions

Spark plug wires are necessary and sold separately:

Item 9192-62 for pre-made lengths for mounting the coil centrally above the engine. Top/intake side set.

Item 9192-64 for pre-made lengths for mounting the coil centrally above the engine. Bottom/exhaust side set.

Item 9192-63 for universal lengths to terminate the coil ends yourself at your preferred lengths