Universal/DIY 911 Porsche wire set for 3x2 Bosch Coils (PE3-IG2, Haltech, other applications)

High-performance ignition lead/spark plug wire set:

• 8mm Silicone insulation spark plug wires with an abrasion resistant, cut resist and fire resistant protective sleeve.
• Spiral core wire for low resistance and more shielding against EMI (electromagnetic interference) RFI (radio frequency interference) compared to solid-core wires.
• Black and red sets are available.

Wire set for Bosch 3x2 coils used in our PE3-IG2 ignition kits, Haltech EFI conversions, or just for use as DIY parts with the Bosch coils for your own ECU or setup.

This is a universal wire set for 911 engines for PE3-IG Ignition or Standalone ECU running the Bosch 3x2 coils. All leads are approximately 48" long and can be cut to length. The spark plug end is installed to the wire already. The coil end must be terminated by the installer and the coil end components are included loose in a bag.

An 8mm spark plug terminal crimp tool is required to assemble the coil end of this wire