PE3-IG2 dual plug ignition for 964/993 Porsche - factory flywheel crank trigger and sensor

PE3-IG2 dual plug ignition for 911 Porsche, for 1989.5-1998 3.6 liter 964/993 model engines. This kit utilizes the factory flywheel crank trigger and sensor

Includes:

• Performance Electronics PE3-IG2 ignition & main harness
  • A DIY wiring harness is included, which is terminated on the ECU end into the appropriate connector, but free lengths of unterminated wire on the other end. The installer must route, terminate, and cover the harness to complete the installation.
• 2x Coil pack - Bosch 3x2 type
• Dual plug ignitor kit
• Distributor hole plug
• Instructions

Spark plug wires are necessary and sold separately:

Item 9192-62 for pre-made lengths for mounting the coil centrally above the engine. Top/intake side set.

Item 9192-64 for pre-made lengths for mounting the coil centrally above the engine. Bottom/exhaust side set.

Item 9192-63 for universal lengths to terminate the coil ends yourself at your preferred lengths